Lightboxes

Gone are the days when lightboxes were just aluminium extrusions and acrylic faces. Nowadays, there is a myriad of options available to you.

Intracut (push through) lightboxes are all the rage because they are relatively cheap and give you a premium finish. The ability to push through acrylic means that you can add a 3rd dimension to the face by inserting 30mmT acrylic. Only the push through bits light up for a truely custom made look. Did I mention that this is relatively cheap too. We can send them out flat packed ready for install.

Another lightbox type is Silicone Edge Graphic (SEG) lightboxes. These are the fabric ones that didn’t exist until about 5 years ago, but have taken the world by storm. The lightboxes are easily assembled on site and the graphics can be installed by retail staff.

Of course we also make all manor of other lightboxes. traditional, large banner boxes, acrylic cubes and so on.

Request Quote

Intracut Lightbox

The intracut lightbox is a newish addition to the signmakers arsenal. They are popular because they are relatively cheap, but look premium.

The ability to insert letters in the cut outs means that you can add a 30mm acrylic for 3D effect.

Only the intracut part light up leaving the staging panel to be any finish you desire.

We send these out flat packed ready for easy install.

Product Code: VC-LB-001
Illumination: Face
Material Options: Metal, Acrylic Lettering
Backing: Aluminium
Side Finish: Aluminium
Mounting: Flush-mount
Minimum Letter Height: 150mm
Maximum Letter Height: 600mm (400mmH+ = less economical)
Minimum Stoke Width: 18mm
Light Source: Sloan LED (10 year warranty)
Letter Warranty: Indoor = 7 years / Outdoor = 5 years
Back to top
Request Quote

Aluminium Extrusion Lightbox

The traditional opal acrylic lightbox. We have all installed one. When it comes to bang for you buck they can’t be beaten.

Aluminium lightbox extrusion can be cut to any rectangle shape limited only by the size of available acrylic.

We can paint the extrusion to any PMS colour.

For a more sophisticated look, why no apply flat cut acrylic to the face for a 3D effect.

Product Code: VC-LB-003
Illumination: Face
Material Options: Back Lit Fabric Banner
Backing: Aluminium / Blackout Acrylic
Side Finish: Aluminium (Can be painted)
Mounting: Flush-mount
Back to top
Request Quote

Fabric Banner Lightbox

The Silicone Edge Graphic Lightbox is a brilliant example of great design. Take an aluminium extrusion. Mitre cut the corners and add in corner connectors. Pop some LEDs in there and hey presto. Lightbox!

These are really easy to install, cost effective and even retail staff can change the prints.

We don’t print in house (because we partner many print houses), but we can supply outsourced prints for your job or you can supply your own.

Product Code: VC-LB-003
Illumination: Face
Material Options: Back Lit Fabric Banner
Backing: Aluminium / Blackout Acrylic
Side Finish: Aluminium (Can be painted)
Mounting: Flush-mount
Back to top
Request Quote

Large Format (Banner) Lightbox

When a lightbox gets larger than the size of a piece of acrylic, then there is really no other option than a vinyl banner lightbox.

We can make the to any conceivable size. I think our largest so far is 12.66m x 3.35m in size.

We can also do custom shapes as well, so you don’t just need to stick to rectangles.

Product Code: VC-LB-004
Illumination: Face
Material Options: Back Lit Vinyl Banner
Backing: Various
Side Finish: Various
Back to top
Request Quote

Fabricated Acrylic Lightbox

We can fabricate custom acrylic lightbox shapes.

Take a look at the Vacation lightbox. It has a 4 visible sides and 6mm black acrylic lettering on the face.

Come up with a design and we will help you realise it.

Product Code: VC-LB-002
Illumination: Face (or Face and Side)
Material Options: Acrylic
Backing: Aluminium
Side Finish: Aluminium, Acrylic
Mounting: Flush-mount
Minimum Letter Height: 150mm
Minimum Stoke Width: 20mm
Back to top
Request Quote

Custom Lightbox

The normal stuff is boring. We can help your project really zing.

Take this custom exposed lightbox made from MDF and glass and featuring exposed old school fluro lights. Throw in a bit of laser cut acrylic on the face and voila. Instant cool factor.

Product Code: VC-LB-003
Illumination: Face
Material Options: Back Lit Fabric Banner
Backing: Aluminium Blackout Acrylic
Side Finish: Aluminium (Can be painted)
Mounting: Flush-mount
Back to top

Get a Free Quote Today

We are here for all of your signage needs!

sales@visualcreations.com.au