Block Lettering

10 years ago, block lettering didn’t really exist. 15 years ago, it wasn’t even possible. But now it is everywhere and it is easy to see why. It looks great and it’s relatively cheap.

Routered from a block of solid acrylic, they cut down on the labour required when compared to hand fabricated letters so it keeps the costs lower. And you can have really skinny stroke widths while still having perfectly clear lighting and no hot spots.

Have a look at our Acrylic Neon alternative. We supply it with a low voltage power supply, so no electrician required here.

All of our lettering is supplied with installation templates and we check with you before the job goes ahead where you need your power cords and fixing holes.

All of our lettering has IP Rated LEDs inside them so they are good outdoors. None of the crappy zig-zag tape here that fails within 5 months. Our LEDs are 10 year warranted for SloanLED!

Request quote

Front Lit (Face Only)

In this range of lettering, the face of the letter is illuminated. We can apply a vinyl to the face of the letter to give it colour.

The sides and back are painted in a colour of your choice with white being the cheapest finish.

We have a 20mm minimum stroke width here meaning the skinniest part of the letter can’t be less than 20mm otherwise the lighting is not even.

Product Code: VC-ILB-001
Illumination: Face
Material Options: M100
Depth: 30mm
Finishing Options: F100, F101, F102
Installation Options: INS01, INS02, INS03, INS04
Minimum Letter Height: 150mm
Maximum Letter Height: 600mm (400mmH+ = less economical)
Minimum Stoke Width: 18mm
Light Source: Sloan LED (10 year warranty)
Letter Warranty: Indoor = 7 years / Outdoor = 5 years
Back to top
Request quote

Side Lit

This type of lettering has the light coming out of the sides only to give it a glow on the wall.

They allow you to get your PMS matched paint or vinyl onto the face to match your clients corporate colours, but while still bringing in a lit element.

Product Code: VC-ILB-002
Illumination: Side
Material Options: M100
Depth: 30mm
Finishing Options: F100, F101, F102
Installation Options: INS01, INS02, INS03, INS04
Minimum Letter Height: 150mm
Maximum Letter Height: 600mm (400mmH+ = less economical)
Minimum Stoke Width: 18mm
Light Source: Sloan LED (10 year warranty)
Letter Warranty: Indoor = 7 years / Outdoor = 5 years
Back to top
Request quote

Front (Face) & Side Lit

Try something more sophisticated with a two tone finish.

In this signage type, the light comes out the front and half of the side.

Product Code: VC-ILB-003
Illumination: Face & Side
Material Options: M100
Depth: 30mm
Finishing Options: F100, F101, F102
Installation Options: INS01, INS02, INS03, INS04
Minimum Letter Height: 150mm
Maximum Letter Height: 600mm (400mmH+ = less economical)
Minimum Stoke Width: 18mm
Light Source: Sloan LED (10 year warranty)
Letter Warranty: Indoor = 7 years / Outdoor = 5 years
Back to top
Request quote

Back (Halo) Lit

This lettering is designed to be spaced off the wall (we recommend 20mm) and is perfect for when you want to provide a glow behind the letter.

It allows your lettering to be a corporate colour or even black, while still providing a lit element to showcase the signage.

Product Code: VC-ILB-004
Illumination: Back (Halo Effect)
Material Options: M100
Depth: 30mm
Finishing Options: F100, F101, F102
Installation Options: INS01, INS02, INS03, INS04
Minimum Letter Height: 150mm
Maximum Letter Height: 600mm (400mmH+ = less economical)
Minimum Stoke Width: 18mm
Light Source: Sloan LED (10 year warranty)
Letter Warranty: Indoor = 7 years / Outdoor = 5 years
Back to top
Request quote

Front (Face) & Back (Halo) Lit

Get fancy with our face and halo lit letters. You can space these letters off the wall for a halo effect, but also include the face lighting of the letters.

You could apply a coloured vinyl to the face to match corporate colour and have a white glow on the wall behind.

Product Code: VC-ILB-005
Illumination: Face & Back (Halo Effect)
Material Options: M100
Depth: 30mm
Finishing Options: F100, F101, F102
Installation Options: INS01, INS02, INS03, INS04
Minimum Letter Height: 150mm
Maximum Letter Height: 600mm (400mmH+ = less economical)
Minimum Stoke Width: 18mm
Light Source: Sloan LED (10 year warranty)
Letter Warranty: Indoor = 7 years / Outdoor = 5 years
Back to top
Request quote

Side & Back (Halo) Lit

This type of letter is designed to provide halo lighting to letters that are fixed directly to the wall. It makes install easy as all you need to do is glue the letter in the template and feed the wire.

It’s also more likely to catch your attention from side on compared to halo lit letters.

Product Code: VC-ILB-006
Illumination: Side & Back (Halo Effect)
Material Options: M100
Depth: 30mm
Finishing Options: F100, F101, F102
Installation Options: INS01, INS02, INS03, INS04
Minimum Letter Height: 150mm
Maximum Letter Height: 600mm (400mmH+ = less economical)
Minimum Stoke Width: 18mm
Light Source: Sloan LED (10 year warranty)
Letter Warranty: Indoor = 7 years / Outdoor = 5 years
Back to top
Request quote

Rounded Face Front (Face) Lit

Soften up your letter and give the finish a greater evenness of light.

In this type of letter, we round off the front edge to take the sharpness out of it and make it look more expensive than it is.

Choose from a 5, 10 or 15mm radius edge.

Product Code: VC-ILB-007
Illumination: Face
Material Options: M100
Depth: 20mm, 30mm
Finishing Options: F100, F101, F102
Installation Options: INS01, INS02, INS03, INS04
Minimum Letter Height: 150mm
Maximum Letter Height: 600mm (400mmH+ = less economical)
Minimum Stoke Width: 18mm
Light Source: Sloan LED (10 year warranty)
Letter Warranty: Indoor = 7 years / Outdoor = 5 years
Back to top
Request quote

Rounded Face Front (Face) & Side Lit

This letter type can be fixed directly to the wall and features front and side lighting along with a rounded front edge.

It’s similar to our neon lighting but is designed to show off varying stroke width where neon is a single stroke width.

Choose from a 5, 10 or 15mm radius edge.

Product Code: VC-ILB-008
Illumination: Face & Side
Material Options: M100
Depth: 20mm, 30mm
Finishing Options: F100, F101, F102
Installation Options: INS01, INS02, INS03, INS04
Minimum Letter Height: 150mm
Maximum Letter Height: 600mm (400mmH+ = less economical)
Minimum Stoke Width: 18mm
Light Source: Sloan LED (10 year warranty)
Letter Warranty: Indoor = 7 years / Outdoor = 5 years
Back to top
Request quote

Rounded Face Back (Halo) Lit

This lettering is designed to be spaced off the wall (we recommend 20mm) and is perfect for when you want to provide a glow behind the letter.

It incorporates the rounded edge on the front face and you can choose from a 5, 10 or 15mm radius edge.

It allows your lettering to be a corporate colour or even black, while still providing a lit element to showcase the signage.

Product Code: VC-ILB-009
Illumination: Back (Halo) Effect
Material Options: M100
Depth: 20mm, 30mm
Finishing Options: F100, F101, F102
Installation Options: INS01, INS02, INS03, INS04
Minimum Letter Height: 150mm
Maximum Letter Height: 600mm (400mmH+ = less economical)
Minimum Stoke Width: 18mm
Light Source: Sloan LED (10 year warranty)
Letter Warranty: Indoor = 7 years / Outdoor = 5 years
Back to top
Request quote

Rounded Face Front & Back Lit

This type of lettering covers all the bases. Front and rear (halo) illumination while incorporating a rounded front face.

Choose from a 5, 10 or 15mm radius edge.

It’s designed to be spaced of the wall (we recommend 20mm), but can be direct fixed to the wall for a more subtle halo effect.

Product Code: VC-ILB-010
Illumination: Face & Back
Material Options: M100
Depth: 20mm, 30mm
Finishing Options: F100, F101, F102
Installation Options: INS01, INS02, INS03, INS04
Minimum Letter Height: 150mm
Maximum Letter Height: 600mm (400mmH+ = less economical)
Minimum Stoke Width: 18mm
Light Source: Sloan LED (10 year warranty)
Letter Warranty: Indoor = 7 years / Outdoor = 5 years
Back to top
Request quote

Rounded Face Side & Back (Halo) Lit

This type of lettering looks very sophisticated when painted to a corporate colour and fixed to a wall.

The painted rounded face conveys your customers colours and look while the side and back lighting gives a halo effect with a little bit more.

Product Code: VC-ILB-011
Illumination: Side & Back (Halo Effect)
Material Options: M100
Depth: 20mm, 30mm
Finishing Options: F100, F101, F102
Installation Options: INS01, INS02, INS03, INS04
Minimum Letter Height: 150mm
Maximum Letter Height: 600mm (400mmH+ = less economical)
Minimum Stoke Width: 18mm
Light Source: Sloan LED (10 year warranty)
Letter Warranty: Indoor = 7 years / Outdoor = 5 years
Back to top
Request quote

Acrylic Neon

This is the LED Acrylic equivalent of glass neon. From a distance, you won’t notice the difference.

It’s a 20mm single stroke thickness to mimic the 20mm tube neon.

It’s available in White, Warm White, Red, Blue, Green and Yellow.

Product Code: VC-ILB-012
Illumination: Front & Side
Material Options: M100
Depth: 20mm, 30mm
Finishing Options: F100, F101, F102
Installation Options: INS01, INS02, INS03, INS04
Minimum Letter Height: 150mm
Maximum Letter Height: 600mm (400mmH+ = less economical)
Minimum Stoke Width: 18mm
Light Source: Sloan LED (10 year warranty)
Letter Warranty: Indoor = 7 years / Outdoor = 5 years
Back to top

Get a Free Quote Today

We are here for all of your signage needs!

sales@visualcreations.com.au