24Hour Callout

CALL NOW: 1-800-123-456

Installation Instructions

  1. Connect wires as per above diagram, deciding the wire length.
  2. Connections between wires with standard terminals, dealing the layup with insulated adhesive tape.
  3. Under the condition permitted, all the wires should be hidden.
  4. LED should be switched off for 15 minutes at least in 24 hours in order to maximise the use of it.
  5. General power supply should be placed in a ventilated location for heat dissipation. The general transformer should be protected from water.
  6. Power supply should be connected between the luminous letter instead of both ends.
Distance (M) From The Power Source
Power 0-5m 5-10m 10-20m
12W      
15W      
20W      
25W      
30W      
60W      
100W      
150W